Tips From the Moving Company Pros: Ways To Move a Pinball Maker



With pinball making a substantial resurgence throughout the country, Gentle Giant wishes to make sure that these traditional, beautiful devices remain damage-free while being transported. Oh, and we desire individuals moving them to be safe, too.

In the beginning glance, pinball devices can appear frightening to move because of their fragility, size, and weight. Thankfully, our proficient Giants have a couple of tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

Most of modern pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either two or 4 bolts. All Electro-Mechanical pinballs utilize this system, along with the early Strong State makers.

Later devices have hinges and utilize a latching system to keep the headbox upright. There may likewise be 2 bolts inside as added safety, in case the lock is broken or accidentally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you have to remove the headbox rear access panel to access to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however over time the key might have been lost. Frequently, there is a screw keeping this panel in place.

As soon as inside, remove the bolts and disconnect the big connectors that have wiring decreasing into the maker. You may want to identify these adapters to put them back in the right spot, however they need to be different sizes, making it challenging to plug back improperly.

You can now get rid of the headbox completely, or fold the headbox down onto the playfield glass. Make sure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs

For early Solid State Pinballs, you will need to eliminate the back glass. There is a lock situated on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

As soon as unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Open up the back box lamp panel by lifting the lock situated on either the left-hand side or right-hand side. The panel can now swing out to you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the light panel in order to swing it open.

Now that you are within, you can remove the bolts, and any plugs that have wires going down into the device. You might wish to identify these plugs to put them back in the right spot. You may not require to get rid of the plugs, as the circuitry should be long enough to enable the headbox to be folded down.

At this moment, you can secure the light panel and change the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Utilizing the provided key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is an easy setup and needs no tools.

If you can now fold down the head box onto the cabinet, you're done. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.

You need to get inside if you can not fold the head box down. There is a lock situated at the top of the back glass in the. Utilize the provided secret to unlock, and remove the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will need to remove the screen panel. (Some newer Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Get rid of the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on get redirected here the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.

Pinball Maker legs are held in location by 8 bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.

These captive nuts and threaded plates can be harmed, and the usage of additional nuts might have been needed. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise up the playfield by positioning your hand where the ball drains pipes, and lift the playfield up.

You should now have access to any nuts that may have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Be sure to mark or remember which legs Bonuses are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.

You are now ready to transport your pinball machine. Before you load it, make sure you remove the pinballs so they don't bounce around during transport.

If you are moving how to move a pinball machine the pinball using a van or SUV, it may be easier to remove the legs just prior to loading the machine. Get a friend to have and assist among you supporting the pinball, while the other gets rid of the front legs. Move the maker in, then get rid of the back legs. It is much simpler to pack the device front.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop all of a sudden!

For Electro-Mechanical pinball devices, you need to remove the headbox rear access panel to gain access to the bolts and plugs inside. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it may be simpler to remove the legs just prior to loading the machine. Get a good friend to assist and have one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *